Folding Pipejack Stands

FoldingJackStand

 

V-Head Pipe Jack Stands

V-Head Pipejack Stands

V-Head Pipjack Stands

  • Adjustable Height – Varies by Model: 14-1/2″ up to 48″ – See Models Below
  • Quick Slip Tube Adjustment
  • Fine Screw Adjustment
  • Adjusting Screw 1 3/8″-5″ Pitch Full Acme Thread
  • “T” Handle Lock For Slip Tube ½”-13 Thread
  • Adjusting Nut Length 1 to 1½” With Balance Ball Ends For Easy Adjusting
  • Certified Testing By Independent Source
  • All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor
  • ‘V’ On The V-Head Jack Stand Made From 3/8″ x 2½” HR Bar
  • Bases Accept: V-Head, Roller Head, Transfer Ball & Bar Stock Roller Head
  • Built In Stop For Slip Tube To Prevent Injury
  • Washer Face On Slip Tube For Smoother Screw Adjustment
  • Legs Are 1″ Square Tube 16 Gauge Wall Thickness
  • All Legs Have 2″ Diameter Foot Surface
  • Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet
  • Safety Washer Has “EZ” Lift Release Tab
  • Safety Washer Has Retainer Pin To Prevent Loss Of Washer
  • Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
  • V-Head Painted With High Visibility Yellow Paint
  • V-Head Will Accept Work Piece Up To 12″ Diameter
  • Working Load Capacity For V-Head Jack Stands Is 2,500 LBS
  • Complete Stand With V-Head Weighs 15 to 20 Lbs.
  • Stand has Powder Coat Finish

99BJS

"Super Stubby" V-Head Pipe Jack Stand

"Super Stubby" V-Head Pipe Jack Stand

Height: 12″ – 18″
Weight: 15 Lbs.

100BJS

"Stubby" V-Head Pipe Jack Stand

"Stubby" V-Head Pipe Jack Stand

Height: 18″ – 27″
Weight: 18 Lbs.

101BJS

Standard V-Head Pipe Jack Stand

Standard V-Head Pipe Jack Stand

Height: 29″ – 46″
Weight: 20 Lbs.

102BJS

"Shortie" V-Head Pipe Jack Stand

"Shortie" V-Head Pipe Jack Stand

Height: 25″ – 44″
Weight: 20 Lbs.

Heavy Duty V-Head Pipe Jack Stand – 107BJS

  • Adjustable Height Minimum 29″ Maximum 46″
  • Quick Slip Tube Adjustment
  • Fine Screw Adjustment
  • Adjusting Screw 1 3/8 – 5″ Pitch Full Acme Thread
  • “T” Handle Lock For Slip Tube 1/2 – 13 Thread
  • Adjusting Nut Length 11 1/2″ With Balance Ball Ends For Easy Adjusting
  • Certified Testing By Independent Source
  • All Stands Have Safety Instructional Label & Load Capacity Label With 2:1 Safety Factor
  • “V” on V-Head Made From 3/8″ x 2 1/2″ HR Bar
  • Bases Accept V-Head, Roller Head, Transfer Ball & Bar Stock Roller Head
  • Built-In “Stop” For Slip Tube To Prevent Injury
  • Washer Face On Slip Tube For Smoother Screw Adjustment
  • Legs Are 1 1/4″ Square Tub 11 Gage Wall Thickness
  • All Legs Have 2 1/2″ Diameter Foot Surface
  • Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
  • Safety Washer Has “EZ” Lift Release Tab
  • Safety Washer Has Retainer Pin To Prevent Loss Of Washer
  • Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
  • V-Head Powder Coated With Safety Yellow For High Visibility
  • Work Load Capacity For V-Head Stand 6000 L BS
  • Complete Stand With V-Head Weighs 31 LBS

Roller Head Pipe Jack Stand – 103BJS

Blackjack Roller Head Pipe Jack Stand - 103BJS

Blackjack Roller Head Pipe Jack Stand - 103BJS

Model Options
110BJS Roller Head Jack Stand With Rubber Rollers
111BJSHD Heavy Duty Roller Head Stand
113BJS/WSS Roller Head Jack Stand With Stainless Steel Rollers
  • Adjustable Height: Min.- 29″ Max.- 46″
  • Quick Slip Tube Adjustment
  • Fine Screw Adjustment
  • Adjusting Screw 1 3/8″-5 Pitch Full Acme Thread
  • “T” Handle Lock For Slip Tube ½”-13 Thread
  • Adjusting Nut Length 1 to 1½” With Balance Ball Ends For Easy Adjusting
  • Certified Testing By Independent Source
  • All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor
  • Rollers 4″ Dia. x ½” A 36 Steel Lathe Turned For Concentricity
  • Rollers Have Oilless Bronze Bushings
  • Bases Accept: V Head, Roller Head, Transfer Ball & Bar Stock Roller Head
  • Built In Stop For Slip Tube To Prevent Injury
  • Washer Face On Slip Tube For Smoother Screw Adjustment
  • Legs Are 1″ Square Tube 16 Gauge Wall Thickness
  • All Legs Have 2″ Diameter Foot Surface
  • Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet
  • Safety Washer Has “EZ” Lift Release Tab
  • Safety Washer Has Retainer Pin to prevent Loss Of Washer
  • Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
  • Rollers Painted With High Visibility Yellow Paint
  • Roller Head Will Accept Work Piece Up To 12″ Diameter
  • Working Load Capacity For Roller Head Jack Stands Is 2500 Lbs.
  • Complete Stand With Roller Head Weighs 23 Lbs.
  • Stand has Powder Coat Finish

Adjustable Roller Pipe Jack Stand – 106BJS

Adjustable Roller Pipe Jack Welding Stand - BJS106

Adjustable Roller Pipe Jack Welding Stand - BJS106

Model Variations
108BJS “Shortie” Adjustable Roller Stand With Rubber Rollers
109BJS Adjustable Roller Stand With Rubber Rollers
114BJS/WSS Adjustable Roller Stand With Stainless Steel Rollers
115BJS Adjustable Roller Stand W/Adjustable Height
  • Roller Adjustment From Either End Of Carriage With 1 ¼ Hex Nuts
  • Rollers 5/8 x 4” Diameter Cast Iron Lathe Turned For Concentricity
  • Working Height 30 ¾” at Center Line of Rollers
  • Roller Holders Are Made Of Cast Steel
  • Adjusting Screw 3/4″ – 6 Pitch Full Acme Thread
  • Adjusting Screw Mounted in Oil Lite Bronze Bushings
  • Cariage Housing 2” x 3” 11 Gage Tubing
  • Leg Pattern 23” x 26” For Working Stability
  • Legs Are Of “A” Frame Design
  • Center Braces From Middle of Carriage To Lower Leg Brace For Even Distribution Of Load
  • All Legs Have 2” Diameter Foot Surface
  • Adjustment Of Rollers Will Accept 1/2″ – 48” Diameter Work Piece
  • Roller Holders Have Drain Passages To Prevent Trapped Water If Used Outdoors
  • Carriage Housing Has Drain Holes to Allow Water To Drain Through Legs
  • Legs & Braces 1” Square Tube 16 Gage
  • Rollers Are Powder Coated With High Visibility Safety Yellow
  • All Stands Are Labeled With Working Capacity Of At Least 2 to 1 Safety Factor
  • Certified Testing By Independent Source
  • Working Load Capacity 6,000 LBS
  • Complete Stand Weighs 32 LBS.
  • Stand has Powder Coat Finish

V-Roller Head Pipe Jack Stand – 122BJS

V-Roller Pipe Jack Welding Stand - BJS122

V-Roller Pipe Jack Welding Stand - BJS122

Specifications coming soon. Call for details.

Bar Stock Pipe Jack Stand – 104BJS

Bar Stock Pipe Jack Stand <br /> Model: 104BJS

Bar Stock Pipe Jack Stand - Model: 104BJS

  • Adjustable Height: Minimum 32” Maximum 46”
  • Certified Testing By Independent Source
  • All Stands Have Safety Instructional Label & Load Capacity Label With 2,1 Safety Factor
  • Bases Accept V Head, Roller Head, Transfer Balls, & Bar Stock
  • Built In ‘Stop’ For Slip Tube To Prevent Injury
  • Washer Face On Slip Tube For Smoother Screw Adjustment
  • Legs Are 1” Square Tube 16 Gage Wall Thickness
  • All Legs Have 2” Diameter Foot Surface
  • Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
  • Safety Washer Has “EZ” Lift, Release Tab
  • Safety Washer Has Retainer Pin To Prevent Loss Of Washer
  • Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
  • Bar Stock Roller Head Painted With High Visibility Yellow Paint
  • Working Load Capacity for Bar Stock Roller Head Stands 2,500 Lbs.
  • Complete Stand With Bar Stock Head Weighs 20 Lbs.
  • Stand has Powder Coat Finish

Ball Transfer Jack Stand – 105BJS

Ball Transfer Pipe Jack Welding Stand - BJS105

Ball Transfer Pipe Jack Welding Stand - BJS105

  • Adjustable Height: Minimum 29” Maximum 46”
  • Quick Slip Tube Adjustment
  • Fine Screw Adjustment
  • Adjusting Screw 1 3/8 – 5 Pitch Full Acme Thread
  • “T” Handle Lock For Slip Tube 1/2 – 13 Thread
  • Adjusting Nut Length 11 – 1/2” With Balance Ball Ends For Easy Adjusting
  • Certified Testing By Independent Source
  • All Stands Have Safety Instructional Label & Load Capacity Label With 2,1 Safety Factor
  • “V” On V Head Stand Made From 3/8” x 2 1/2 ” HR Bar
  • Bases Accept V Head, Roller Head, Transfer Balls, & Bar Stock
  • Built In ‘Stop’ For Slip Tube To Prevent Injury
  • Washer Face On Slip Tube For Smoother Screw Adjustment
  • Legs Are 1” Square Tube 16 Gage Wall Thickness
  • All Legs Have 2” Diameter Foot Surface
  • Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
  • Safety Washer Has “EZ” Lift, Release Tab
  • Safety Washer Has Retainer Pin To Prevent Loss Of Washer
  • Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
  • V Head Painted With High Visibility Yellow Paint
  • Working Load Capacity for V Head Stands 1000 Lbs.
  • Complete Stand With V Head & Transfer Balls Weigh 25 Lbs.
  • Stand has Powder Coat Finish

Mobile Pipe Jack Stand – 130BJS

Mobile Pipe Jack Welding Stand - 130BJS

Mobile Pipe Jack Welding Stand - 130BJS

  • Adjustable Height
    • Without Casters: Minimum 25″, Maximum 37″
    • With Caster’s: Minimum 34” Maximum 46”
  • Complete Stand With V Head Weighs 116 LBS
  • Quick Slip Tube Adjustment
  • Fine Screw Adjustment
  • Adjusting Screw 1 3/8 –5 Pitch Full Acme Thread
  • “T” Handle Lock For Slip Tube ½ – 13 Thread
  • Adjusting Nut Length 11 ½ “ With Balance Ball Ends For Easy Adjusting
  • Certified Testing By Independent Source
  • All Stands Have Safety & Load Capacity Label With 2 to 1 Safety Factor
  • “V” On V – Head Made From 3 x 1 ½ x 3/8 Channel
  • Bases Accept All Standard Blackjack Heads Including 16” Mobile Jack Head
  • Built In “Stop” For Slip Tube To Prevent Injury
  • Washer Face on Slip Tube For Smoother Screw Adjustment
  • Base Is 3 x 1 x 11 Gage Tubing
  • Center Tube Is Schedule 80 Pipe
  • Safety Washer Has “EZ” Lift Release Tab
  • Safety Washer Has Retainer Pin To Prevent Loss Of Washer
  • Safety Washers Fall Proof Design Prevent Slippage Prior To Tightening “T” Handle
  • Casters 2” x 8” Diameter, Swivel Type Equipped With Wheel & Swivel Locks
  • Work Load Capacity For Mobile Jack 4000 LBS
  • Stand has Powder Coat Finish

Heavy Duty Metal Saw Horse – 120BJS

BlackJack Heavy Duty Metal Saw Horse - BJS120

BlackJack Heavy Duty Metal Saw Horse – BJS120

  • Length Of 5’ Can Be Changed to Suit Customer Requirements
  • Height 36” Can Be Changed to Suit Customer Requirement
  • Legs A Frame Design Made of 3 x 2 x 11 Gage Tube
  • Bracing From Center Of Beam To Legs For 3 Point Support
  • Certified Testing By Independent Source
  • Top 3 x 2 3/8 x 3/16 I Beam
  • All Saw Horses Labeled With Load Capacity With 2 to 1 Safety Factor
  • Working Load Capacity For Heavy Duty Metal Saw Horse Is 12,000 LBS
  • Saw Horse Has Powder Coated Finish

Welder’s Stool – 116BJS

Welder's Stool - 116BJS

Welder's Stool - 116BJS

  • Height of 15” to 21 ½
  • Seat Height Adjustment With Safety Washer & Locking “T” Handle
  • Seat Diameter 15”
  • 5 Swivel Casters For Non Tipping
  • Weight Capacity 350 LBS
  • Stool Has Powder Coated Finish