V-Head Pipjack Stands

• Adjustable Height – Varies by Model: 14-1/2″ up to 48″ – See Models Below
• Quick Slip Tube Adjustment
• Fine Screw Adjustment
• Adjusting Screw 1 3/8″-5″ Pitch Full Acme Thread
• “T” Handle Lock For Slip Tube ½”-13 Thread
• Adjusting Nut Length 1 to 1½” With Balance Ball Ends For Easy Adjusting
• Certified Testing By Independent Source
• All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor
• ‘V’ On The V-Head Jack Stand Made From 3/8″ x 2½” HR Bar
• Bases Accept: V-Head, Roller Head, Transfer Ball & Bar Stock Roller Head
• Built In Stop For Slip Tube To Prevent Injury
• Washer Face On Slip Tube For Smoother Screw Adjustment
• Legs Are 1″ Square Tube 16 Gauge Wall Thickness
• All Legs Have 2″ Diameter Foot Surface
• Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet
• Safety Washer Has “EZ” Lift Release Tab
• Safety Washer Has Retainer Pin To Prevent Loss Of Washer
• Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
• V-Head Painted With High Visibility Yellow Paint
• V-Head Will Accept Work Piece Up To 12″ Diameter
• Working Load Capacity For V-Head Jack Stands Is 2,500 LBS
• Complete Stand With V-Head Weighs 15 to 20 Lbs.
• Stand has Powder Coat Finish

99BJS "Super Stubby" V-Head Pipe Jack Stand Height: 12″ – 18″ Weight: 15 Lbs.

100BJS "Stubby" V-Head Pipe Jack Stand Height: 18″ – 27″ Weight: 18 Lbs.

101BJS Standard V-Head Pipe Jack Stand Height: 29″ – 46″ Weight: 20 Lbs.

102BJS "Shortie" V-Head Pipe Jack Stand Height: 25″ – 44″ Weight: 20 Lbs.

]]> http://www.pipejack.com/products/v-head-pipe-jack-stands/v-head-pipe-jack-welding-stands.html/feed 0 http://www.pipejack.com/products/v-head-pipe-jack-stands/heavy-duty-v-head-pipe-jack-stands/heavy-duty-v-head-pipe-jack-stand-107bjs.html http://www.pipejack.com/products/v-head-pipe-jack-stands/heavy-duty-v-head-pipe-jack-stands/heavy-duty-v-head-pipe-jack-stand-107bjs.html#comments Wed, 23 Sep 2009 20:38:00 +0000 admin http://pipejack.thegadgitech.com/?p=162

Blackjack Roller Head Pipe Jack Stand - 103BJS

• Adjustable Height: Min.- 29″ Max.- 46″
• Quick Slip Tube Adjustment
• Fine Screw Adjustment
• Adjusting Screw 1 3/8″-5 Pitch Full Acme Thread
• “T” Handle Lock For Slip Tube ½”-13 Thread
• Adjusting Nut Length 1 to 1½” With Balance Ball Ends For Easy Adjusting
• Certified Testing By Independent Source
• All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor
• Rollers 4″ Dia. x ½” A 36 Steel Lathe Turned For Concentricity
• Rollers Have Oilless Bronze Bushings
• Bases Accept: V Head, Roller Head, Transfer Ball & Bar Stock Roller Head
• Built In Stop For Slip Tube To Prevent Injury
• Washer Face On Slip Tube For Smoother Screw Adjustment
• Legs Are 1″ Square Tube 16 Gauge Wall Thickness
• All Legs Have 2″ Diameter Foot Surface
• Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet
• Safety Washer Has “EZ” Lift Release Tab
• Safety Washer Has Retainer Pin to prevent Loss Of Washer
• Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
• Rollers Painted With High Visibility Yellow Paint
• Roller Head Will Accept Work Piece Up To 12″ Diameter
• Working Load Capacity For Roller Head Jack Stands Is 2500 Lbs.
• Complete Stand With Roller Head Weighs 23 Lbs.
• Stand has Powder Coat Finish

Adjustable Roller Pipe Jack Welding Stand - BJS106

• Roller Adjustment From Either End Of Carriage With 1 ¼ Hex Nuts
• Rollers 5/8 x 4” Diameter Cast Iron Lathe Turned For Concentricity
• Working Height 30 ¾” at Center Line of Rollers
• Roller Holders Are Made Of Cast Steel
• Adjusting Screw 3/4″ – 6 Pitch Full Acme Thread
• Adjusting Screw Mounted in Oil Lite Bronze Bushings
• Cariage Housing 2” x 3” 11 Gage Tubing
• Leg Pattern 23” x 26” For Working Stability
• Legs Are Of “A” Frame Design
• Center Braces From Middle of Carriage To Lower Leg Brace For Even Distribution Of Load
• All Legs Have 2” Diameter Foot Surface
• Adjustment Of Rollers Will Accept 1/2″ – 48” Diameter Work Piece
• Roller Holders Have Drain Passages To Prevent Trapped Water If Used Outdoors
• Carriage Housing Has Drain Holes to Allow Water To Drain Through Legs
• Legs & Braces 1” Square Tube 16 Gage
• Rollers Are Powder Coated With High Visibility Safety Yellow
• All Stands Are Labeled With Working Capacity Of At Least 2 to 1 Safety Factor
• Certified Testing By Independent Source
• Working Load Capacity 6,000 LBS
• Complete Stand Weighs 32 LBS.
• Stand has Powder Coat Finish

Adjustable Roller Pipe Jack Welding Stand with Adjustable Height - 115BJS

• Roller Adjustment From Either End Of Carriage With 1 ¼ “ Hex Nuts
• Rollers 5/8 x 4” Diameter Cast Iron
• Working Height 32 ½ “ to 43 ½ “ at Center of Roller
• Roller Holders Are Made Of Cast Steel
• Adjusting Screw 3/4″ – 6 Pitch Full Acme Thread
• Adjusting Screw Mounted in Oil Lite Bronze Bushings
• Carriage Housing 2” x 3” 11 Gage Tubing
• Leg Pattern 23” x 29” For Working Stability
• All Legs Have 2” Diameter Foot Surface
• Adjustment Of Rollers Will Accept 1/2″ – 48” Diameter Work Piece
• Roller Holders Have Drain Passages To Prevent Trapped Water If Used Outdoors
• Carriage Housing Has Drain Holes to Allow Water To Drain
• Legs & Braces 1” Square Tube 16 Gage
• Rollers Are Powder Coated With High Visibility Safety Yellow
• All Stands Are Labeled With Working Capacity Of At Least 2 to 1 Safety Factor
• Certified Testing By Independent Source
• Working Load Capacity 2,500 LBS
• Complete Stand Weighs 40 LBS
• Stand has Powder Coat Finish

V-Roller Pipe Jack Welding Stand - BJS122

Specifications coming soon. Call for details.

Bar Stock Pipe Jack Stand - Model: 104BJS

• Adjustable Height: Minimum 32” Maximum 46”
• Certified Testing By Independent Source
• All Stands Have Safety Instructional Label & Load Capacity Label With 2,1 Safety Factor
• Bases Accept V Head, Roller Head, Transfer Balls, & Bar Stock
• Built In ‘Stop’ For Slip Tube To Prevent Injury
• Washer Face On Slip Tube For Smoother Screw Adjustment
• Legs Are 1” Square Tube 16 Gage Wall Thickness
• All Legs Have 2” Diameter Foot Surface
• Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
• Safety Washer Has “EZ” Lift, Release Tab
• Safety Washer Has Retainer Pin To Prevent Loss Of Washer
• Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
• Bar Stock Roller Head Painted With High Visibility Yellow Paint
• Working Load Capacity for Bar Stock Roller Head Stands 2,500 Lbs.
• Complete Stand With Bar Stock Head Weighs 20 Lbs.
• Stand has Powder Coat Finish

Ball Transfer Pipe Jack Welding Stand - BJS105

• Adjustable Height: Minimum 29” Maximum 46”
• Quick Slip Tube Adjustment
• Fine Screw Adjustment
• Adjusting Screw 1 3/8 – 5 Pitch Full Acme Thread
• “T” Handle Lock For Slip Tube 1/2 – 13 Thread
• Adjusting Nut Length 11 – 1/2” With Balance Ball Ends For Easy Adjusting
• Certified Testing By Independent Source
• All Stands Have Safety Instructional Label & Load Capacity Label With 2,1 Safety Factor
• “V” On V Head Stand Made From 3/8” x 2 1/2 ” HR Bar
• Bases Accept V Head, Roller Head, Transfer Balls, & Bar Stock
• Built In ‘Stop’ For Slip Tube To Prevent Injury
• Washer Face On Slip Tube For Smoother Screw Adjustment
• Legs Are 1” Square Tube 16 Gage Wall Thickness
• All Legs Have 2” Diameter Foot Surface
• Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
• Safety Washer Has “EZ” Lift, Release Tab
• Safety Washer Has Retainer Pin To Prevent Loss Of Washer
• Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
• V Head Painted With High Visibility Yellow Paint
• Working Load Capacity for V Head Stands 1000 Lbs.
• Complete Stand With V Head & Transfer Balls Weigh 25 Lbs.
• Stand has Powder Coat Finish

Mobile Pipe Jack Welding Stand - 130BJS

• Adjustable Height
• Without Casters: Minimum 25″, Maximum 37″
• With Caster’s: Minimum 34” Maximum 46”
• Complete Stand With V Head Weighs 116 LBS
• Quick Slip Tube Adjustment
• Fine Screw Adjustment
• Adjusting Screw 1 3/8 –5 Pitch Full Acme Thread
• “T” Handle Lock For Slip Tube ½ – 13 Thread
• Adjusting Nut Length 11 ½ “ With Balance Ball Ends For Easy Adjusting
• Certified Testing By Independent Source
• All Stands Have Safety & Load Capacity Label With 2 to 1 Safety Factor
• “V” On V – Head Made From 3 x 1 ½ x 3/8 Channel
• Bases Accept All Standard Blackjack Heads Including 16” Mobile Jack Head
• Built In “Stop” For Slip Tube To Prevent Injury
• Washer Face on Slip Tube For Smoother Screw Adjustment
• Base Is 3 x 1 x 11 Gage Tubing
• Center Tube Is Schedule 80 Pipe
• Safety Washer Has “EZ” Lift Release Tab
• Safety Washer Has Retainer Pin To Prevent Loss Of Washer
• Safety Washers Fall Proof Design Prevent Slippage Prior To Tightening “T” Handle
• Casters 2” x 8” Diameter, Swivel Type Equipped With Wheel & Swivel Locks
• Work Load Capacity For Mobile Jack 4000 LBS
• Stand has Powder Coat Finish

BlackJack Heavy Duty Metal Saw Horse - BJS120

• Height 36” Can Be Changed to Suite Customer Requirement
• Length Of 5’ Can Be Changed to Suite Customer Requirements
• Legs A Frame Design Made of 3 x 2 x 11 Gage Tube
• Bracing From Center Of Beam To Legs For 3 Point Support
• Certified Testing By Independent Source
• Top 3 x 2 3/8 x 3/16 I Beam
• All Saw Horses Labeled With Load Capacity With 2 to 1 Safety Factor
• Working Load Capacity For Heavy Duty Metal Saw Horse Is 12,000 LBS
• Saw Horse Has Powder Coated Finish

Welder's Stool - 116BJS

• Height of 15” to 21 ½
• Seat Height Adjustment With Safety Washer & Locking “T” Handle
• Seat Diameter 15”
• 5 Swivel Casters For Non Tipping
• Weight Capacity 350 LBS
• Stool Has Powder Coated Finish