Author Archives: admin
Pipe Jack Stands for Pipe Welding
Filed under Pipejack News
Tagged as 6000 pound heavy duty pipe jack pipejack jackstands, heavy duty pipe jack stands, heavy duty pipe jackstands, heavy duty pipejack stands, Key Words: Pipejack.com 6000 lb pipe jack stands, pipe welding supply pipe stands.
Tagged as 6000 pound heavy duty pipe jack pipejack jackstands, heavy duty pipe jack stands, heavy duty pipe jackstands, heavy duty pipejack stands, Key Words: Pipejack.com 6000 lb pipe jack stands, pipe welding supply pipe stands.
Blackjack Pipe Jack Stands for Pipe Welding
Quality custom made pipe jack stands from Blackjack. In business for over 18 years build pipe stands that are
safety certified by a third party testing company. New products have been designed and built in the past few years to meet the needs of the pipe welding industry. All pipe jack stands are powder coated for long lasting finish.
Call Blackjack Pipejack Stands for a distributor in your area today.
1-800-552-6344
V-Head Pipe Jack Stands Pipe Welding Stand
Key Words: 6000 lb pipe jack stands, heavy duty pipe jack stands, heavy duty pipejack stands, heavy duty pipe jackstands, 6000 pound heavy duty pipe jack pipejack jackstands, pipe welding supply pipe stands.
Pipe Stand Safety Pin
Filed under Pipe Jack Stand Add-Ons
Tagged as oil field welding stands, pipe jack welding stand, pipe stands, pipe welding pipe jack stands, pipejack stands, welding stands, welding supply pipe jack stands
Tagged as oil field welding stands, pipe jack welding stand, pipe stands, pipe welding pipe jack stands, pipejack stands, welding stands, welding supply pipe jack stands
Add a three position safety pin as an added safety feature!
(Additional cost. Please Inquire. )
V-Head Pipe Jack Stands
Filed under V-Head Pipe Jack Stands
Tagged as oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, V-Head Pipe Jack Stands, welding stands, welding supply pipe jack stands
Tagged as oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, V-Head Pipe Jack Stands, welding stands, welding supply pipe jack stands
V-Head Pipjack Stands
- Adjustable Height – Varies by Model: 14-1/2″ up to 48″ – See Models Below
- Quick Slip Tube Adjustment
- Fine Screw Adjustment
- Adjusting Screw 1 3/8″-5″ Pitch Full Acme Thread
- “T” Handle Lock For Slip Tube ½”-13 Thread
- Adjusting Nut Length 1 to 1½” With Balance Ball Ends For Easy Adjusting
- Certified Testing By Independent Source
- All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor
- ‘V’ On The V-Head Jack Stand Made From 3/8″ x 2½” HR Bar
- Bases Accept: V-Head, Roller Head, Transfer Ball & Bar Stock Roller Head
- Built In Stop For Slip Tube To Prevent Injury
- Washer Face On Slip Tube For Smoother Screw Adjustment
- Legs Are 1″ Square Tube 16 Gauge Wall Thickness
- All Legs Have 2″ Diameter Foot Surface
- Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet
- Safety Washer Has “EZ” Lift Release Tab
- Safety Washer Has Retainer Pin To Prevent Loss Of Washer
- Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
- V-Head Painted With High Visibility Yellow Paint
- V-Head Will Accept Work Piece Up To 12″ Diameter
- Working Load Capacity For V-Head Jack Stands Is 2,500 LBS
- Complete Stand With V-Head Weighs 15 to 20 Lbs.
- Stand has Powder Coat Finish
99BJS
 "Super Stubby" V-Head Pipe Jack Stand Height: 12″ – 18″ |
100BJS
 "Stubby" V-Head Pipe Jack Stand Height: 18″ – 27″ |
101BJS
 Standard V-Head Pipe Jack Stand Height: 29″ – 46″ |
102BJS
 "Shortie" V-Head Pipe Jack Stand Height: 25″ – 44″ |
Heavy Duty V-Head Pipe Jack Stand – 107BJS
Filed under Heavy Duty V-Head Pipe Jack Stands
Tagged as 107bjs, heavy duty, Heavy Duty V-Head Pipe Jack Stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, V-Head Pipe Jack Stands, welding stands, welding supply pipe jack stands
Tagged as 107bjs, heavy duty, Heavy Duty V-Head Pipe Jack Stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, V-Head Pipe Jack Stands, welding stands, welding supply pipe jack stands
- Adjustable Height Minimum 29″ Maximum 46″
- Quick Slip Tube Adjustment
- Fine Screw Adjustment
- Adjusting Screw 1 3/8 – 5″ Pitch Full Acme Thread
- “T” Handle Lock For Slip Tube 1/2 – 13 Thread
- Adjusting Nut Length 11 1/2″ With Balance Ball Ends For Easy Adjusting
- Certified Testing By Independent Source
- All Stands Have Safety Instructional Label & Load Capacity Label With 2:1 Safety Factor
- “V” on V-Head Made From 3/8″ x 2 1/2″ HR Bar
- Bases Accept V-Head, Roller Head, Transfer Ball & Bar Stock Roller Head
- Built-In “Stop” For Slip Tube To Prevent Injury
- Washer Face On Slip Tube For Smoother Screw Adjustment
- Legs Are 1 1/4″ Square Tub 11 Gage Wall Thickness
- All Legs Have 2 1/2″ Diameter Foot Surface
- Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
- Safety Washer Has “EZ” Lift Release Tab
- Safety Washer Has Retainer Pin To Prevent Loss Of Washer
- Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
- V-Head Powder Coated With Safety Yellow For High Visibility
- Work Load Capacity For V-Head Stand 6000 L BS
- Complete Stand With V-Head Weighs 31 LBS
Roller Head Pipe Jack Stand – 103BJS
Filed under Roller Head Pipe Jack Welding Stands
Tagged as oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, Roller Head Pipe Jack Welding Stands, welding stands, welding supply pipe jack stands
Tagged as oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, Roller Head Pipe Jack Welding Stands, welding stands, welding supply pipe jack stands
Blackjack Roller Head Pipe Jack Stand - 103BJS
| Model | Options |
|---|---|
| 110BJS | Roller Head Jack Stand With Rubber Rollers |
| 111BJSHD | Heavy Duty Roller Head Stand |
| 113BJS/WSS | Roller Head Jack Stand With Stainless Steel Rollers |
- Adjustable Height: Min.- 29″ Max.- 46″
- Quick Slip Tube Adjustment
- Fine Screw Adjustment
- Adjusting Screw 1 3/8″-5 Pitch Full Acme Thread
- “T” Handle Lock For Slip Tube ½”-13 Thread
- Adjusting Nut Length 1 to 1½” With Balance Ball Ends For Easy Adjusting
- Certified Testing By Independent Source
- All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor
- Rollers 4″ Dia. x ½” A 36 Steel Lathe Turned For Concentricity
- Rollers Have Oilless Bronze Bushings
- Bases Accept: V Head, Roller Head, Transfer Ball & Bar Stock Roller Head
- Built In Stop For Slip Tube To Prevent Injury
- Washer Face On Slip Tube For Smoother Screw Adjustment
- Legs Are 1″ Square Tube 16 Gauge Wall Thickness
- All Legs Have 2″ Diameter Foot Surface
- Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet
- Safety Washer Has “EZ” Lift Release Tab
- Safety Washer Has Retainer Pin to prevent Loss Of Washer
- Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
- Rollers Painted With High Visibility Yellow Paint
- Roller Head Will Accept Work Piece Up To 12″ Diameter
- Working Load Capacity For Roller Head Jack Stands Is 2500 Lbs.
- Complete Stand With Roller Head Weighs 23 Lbs.
- Stand has Powder Coat Finish
Adjustable Roller Pipe Jack Stand – 106BJS
Filed under Adjustable Roller Pipe Jack Stands
Tagged as adjustable roller stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, Roller Head Pipe Jack Welding Stands, welding stands, welding supply pipe jack stands
Tagged as adjustable roller stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, Roller Head Pipe Jack Welding Stands, welding stands, welding supply pipe jack stands
Adjustable Roller Pipe Jack Welding Stand - BJS106
| Model | Variations |
|---|---|
| 108BJS | “Shortie” Adjustable Roller Stand With Rubber Rollers |
| 109BJS | Adjustable Roller Stand With Rubber Rollers |
| 114BJS/WSS | Adjustable Roller Stand With Stainless Steel Rollers |
| 115BJS | Adjustable Roller Stand W/Adjustable Height |
- Roller Adjustment From Either End Of Carriage With 1 ¼ Hex Nuts
- Rollers 5/8 x 4” Diameter Cast Iron Lathe Turned For Concentricity
- Working Height 30 ¾” at Center Line of Rollers
- Roller Holders Are Made Of Cast Steel
- Adjusting Screw 3/4″ – 6 Pitch Full Acme Thread
- Adjusting Screw Mounted in Oil Lite Bronze Bushings
- Cariage Housing 2” x 3” 11 Gage Tubing
- Leg Pattern 23” x 26” For Working Stability
- Legs Are Of “A” Frame Design
- Center Braces From Middle of Carriage To Lower Leg Brace For Even Distribution Of Load
- All Legs Have 2” Diameter Foot Surface
- Adjustment Of Rollers Will Accept 1/2″ – 48” Diameter Work Piece
- Roller Holders Have Drain Passages To Prevent Trapped Water If Used Outdoors
- Carriage Housing Has Drain Holes to Allow Water To Drain Through Legs
- Legs & Braces 1” Square Tube 16 Gage
- Rollers Are Powder Coated With High Visibility Safety Yellow
- All Stands Are Labeled With Working Capacity Of At Least 2 to 1 Safety Factor
- Certified Testing By Independent Source
- Working Load Capacity 6,000 LBS
- Complete Stand Weighs 32 LBS.
- Stand has Powder Coat Finish
Bar Stock Pipe Jack Stand – 104BJS
Filed under Bar Stock Pipe Jack Stands
Tagged as 104bjs, bar stock pipe jack stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, Roller Head Pipe Jack Welding Stands, welding stands, welding supply pipe jack stands
Tagged as 104bjs, bar stock pipe jack stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, Roller Head Pipe Jack Welding Stands, welding stands, welding supply pipe jack stands
Bar Stock Pipe Jack Stand - Model: 104BJS
- Adjustable Height: Minimum 32” Maximum 46”
- Certified Testing By Independent Source
- All Stands Have Safety Instructional Label & Load Capacity Label With 2,1 Safety Factor
- Bases Accept V Head, Roller Head, Transfer Balls, & Bar Stock
- Built In ‘Stop’ For Slip Tube To Prevent Injury
- Washer Face On Slip Tube For Smoother Screw Adjustment
- Legs Are 1” Square Tube 16 Gage Wall Thickness
- All Legs Have 2” Diameter Foot Surface
- Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
- Safety Washer Has “EZ” Lift, Release Tab
- Safety Washer Has Retainer Pin To Prevent Loss Of Washer
- Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
- Bar Stock Roller Head Painted With High Visibility Yellow Paint
- Working Load Capacity for Bar Stock Roller Head Stands 2,500 Lbs.
- Complete Stand With Bar Stock Head Weighs 20 Lbs.
- Stand has Powder Coat Finish
Ball Transfer Jack Stand – 105BJS
Filed under Ball Transfer Jack Stands
Tagged as 105bjs, ball transfer jack stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, welding stands, welding supply pipe jack stands
Tagged as 105bjs, ball transfer jack stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, welding stands, welding supply pipe jack stands
Ball Transfer Pipe Jack Welding Stand - BJS105
- Adjustable Height: Minimum 29” Maximum 46”
- Quick Slip Tube Adjustment
- Fine Screw Adjustment
- Adjusting Screw 1 3/8 – 5 Pitch Full Acme Thread
- “T” Handle Lock For Slip Tube 1/2 – 13 Thread
- Adjusting Nut Length 11 – 1/2” With Balance Ball Ends For Easy Adjusting
- Certified Testing By Independent Source
- All Stands Have Safety Instructional Label & Load Capacity Label With 2,1 Safety Factor
- “V” On V Head Stand Made From 3/8” x 2 1/2 ” HR Bar
- Bases Accept V Head, Roller Head, Transfer Balls, & Bar Stock
- Built In ‘Stop’ For Slip Tube To Prevent Injury
- Washer Face On Slip Tube For Smoother Screw Adjustment
- Legs Are 1” Square Tube 16 Gage Wall Thickness
- All Legs Have 2” Diameter Foot Surface
- Safety Washer Retainer Finger Formed From 12 Gage Steel Sheet
- Safety Washer Has “EZ” Lift, Release Tab
- Safety Washer Has Retainer Pin To Prevent Loss Of Washer
- Safety Washer “Fall Proof” Design Prevents Slippage Prior To Tightening “T” Handle
- V Head Painted With High Visibility Yellow Paint
- Working Load Capacity for V Head Stands 1000 Lbs.
- Complete Stand With V Head & Transfer Balls Weigh 25 Lbs.
- Stand has Powder Coat Finish
Mobile Pipe Jack Stand – 130BJS
Filed under Mobile Pipe Jack Stands
Tagged as 130bjs, mobile pipe jack stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, welding stands, welding supply pipe jack stands
Tagged as 130bjs, mobile pipe jack stand, oil field welding stands, pipe jack welding stand, pipe stands, pipe welding, pipe welding pipe jack stands, pipejack, pipejack stands, welding stands, welding supply pipe jack stands
Mobile Pipe Jack Welding Stand - 130BJS
- Adjustable Height
- Without Casters: Minimum 25″, Maximum 37″
- With Caster’s: Minimum 34” Maximum 46”
- Complete Stand With V Head Weighs 116 LBS
- Quick Slip Tube Adjustment
- Fine Screw Adjustment
- Adjusting Screw 1 3/8 –5 Pitch Full Acme Thread
- “T” Handle Lock For Slip Tube ½ – 13 Thread
- Adjusting Nut Length 11 ½ “ With Balance Ball Ends For Easy Adjusting
- Certified Testing By Independent Source
- All Stands Have Safety & Load Capacity Label With 2 to 1 Safety Factor
- “V” On V – Head Made From 3 x 1 ½ x 3/8 Channel
- Bases Accept All Standard Blackjack Heads Including 16” Mobile Jack Head
- Built In “Stop” For Slip Tube To Prevent Injury
- Washer Face on Slip Tube For Smoother Screw Adjustment
- Base Is 3 x 1 x 11 Gage Tubing
- Center Tube Is Schedule 80 Pipe
- Safety Washer Has “EZ” Lift Release Tab
- Safety Washer Has Retainer Pin To Prevent Loss Of Washer
- Safety Washers Fall Proof Design Prevent Slippage Prior To Tightening “T” Handle
- Casters 2” x 8” Diameter, Swivel Type Equipped With Wheel & Swivel Locks
- Work Load Capacity For Mobile Jack 4000 LBS
- Stand has Powder Coat Finish
Heavy Duty Metal Saw Horse – 120BJS
Filed under Heavy Duty Metal Saw Horses
Tagged as 120bjs, heavy duty, heavy duty metal saw horse, metal, pipe stands, pipe welding, saw horses, welding stands
Tagged as 120bjs, heavy duty, heavy duty metal saw horse, metal, pipe stands, pipe welding, saw horses, welding stands
BlackJack Heavy Duty Metal Saw Horse - BJS120
- Height 36” Can Be Changed to Suite Customer Requirement
- Length Of 5’ Can Be Changed to Suite Customer Requirements
- Legs A Frame Design Made of 3 x 2 x 11 Gage Tube
- Bracing From Center Of Beam To Legs For 3 Point Support
- Certified Testing By Independent Source
- Top 3 x 2 3/8 x 3/16 I Beam
- All Saw Horses Labeled With Load Capacity With 2 to 1 Safety Factor
- Working Load Capacity For Heavy Duty Metal Saw Horse Is 12,000 LBS
- Saw Horse Has Powder Coated Finish
Welder’s Stool – 116BJS
Filed under Pipe Welder's Stool
Tagged as heavy duty, heavy duty welder's stool, pipe welder's stool, stool, welder's welding stool, welders stool
Tagged as heavy duty, heavy duty welder's stool, pipe welder's stool, stool, welder's welding stool, welders stool
Welder's Stool - 116BJS
- Height of 15” to 21 ½
- Seat Height Adjustment With Safety Washer & Locking “T” Handle
- Seat Diameter 15”
- 5 Swivel Casters For Non Tipping
- Weight Capacity 350 LBS
- Stool Has Powder Coated Finish
